(1) Medium Front Mounting (T-bracket) Component
Solid Billet Aluminum
2 slots compatible for front standard 6mm studs and 1.5"-2" stud spacing on Chinese engine kits.
This the T-bracket that comes standard with the front engine mounts.

The distance between trailing edge of front tube and leading flat area on front of engine (mounting stud holes) with a:

1_1/8 Manic Mechanic mount = Distance or Spacing 2.000"

1_1/4 Manic Mechanic mount = Distance or Spacing 1.980"

1_1/2 Manic Mechanic mount = Distance or Spacing 1.880"

(1) Long Front Mounting (T-bracket) Component
Solid Billet Aluminum
2 slots compatible with standard front 6mm studs, stud spacing 1.5"-2" on Chinese engine kits.

The Long front mounting (T-bracket) component is .210" Longer than the standard medium one.

(1)

(1) Short Rear Mounting (T-bracket) Component
Solid Billet Aluminum
For rear 6mm studs with 1.5" stud spacing
Comes standard with rear engine mounts

The distance between leading edge of down tube and trailing flat area on rear of engine (mounting stud holes) with a:

1_1/8 Manic Mechanic mount = Distance or Spacing 1.820"

1_1/4 Manic Mechanic mount = Distance or Spacing 1.740"

1_1/2 Manic Mechanic mount = Distance or Spacing 1.660"

(1)

(1) Wide Front or Rear Mounting (T-bracket) Component
Solid Billet Aluminum
For front 8mm studs with 2.25" stud spacing
Compatible with all our engine mounts
Use with Zeta engine kits and other newer kits that have wider 8mm studs

(1)