This size is generally for Aluminum frames. Always measure anyway! Some are different sizes.
What you get (1) single engine mount. Make sure you select front or rear in the drop down option when ordering!
This mount is for 1_1/4 tube frames and enginge kits that have 6mm studs with 1.5" - 2" stud spacing's only!
The front engine mount (T-bracket) mounting component has 2 slots to adapt to any of the Chinese engines with M6= 6mm front studs with 1.5"-2" spacing configurations.
**Some engines have wider stud spacing, 2.25" between the studs. With 8mm diameter studs or M8 studs.
These would require purchasing the additional Wide (T bracket) mounting component available in Miscell. Parts on navigation menu of home page.
The rear engine mount (T-bracket) mounting component has 1 hole and 1 slot.
This is because the drive sprocket is very close to one of the mounting studs on the rear mount application.
So the rear (T-bracket) mounting component that has the hole will mount on the stud nearest to the drive sprocket.
SELECT FRONT OR REAR IN OPTIONS WHEN ORDERING! To be sure you get the proper (T-bracket) mounting component!
The frame clamps are interchangeable
***Compatible with all Chinese engine kits that have 6mm studs with 1-1/2 - 2" stud spacing's***
Highly recommend also getting loctite under (Miscellaneous parts)
Easy, fast, secure,
Designed and CNC machined to
match your engine and bicycle frame geometry.
- Available for a variety of frame tube diameters 1_1/8", 1_1/4" and 1_1/2".
**The mounts DO NOT come with mounting bolts because they vary in size.
The mounting studs are usually M6 = 6mm (8mm on some newer models)
If so, replace the mounting studs with a M6 allen bolt
Determine the stud diameter you have: 6mm or 8mm
If you need a custom diameter smaller than 1_1/8"
we can make you a custom reducer bushing for $30.00
call in to order the custom reducer bushings 727-551-1435
Official Manic Mechanic Part*