Home > High Performance Intakes > Boost Bottle Intake (Pre-Tapped) 32mm >

(Pre-Tapped) Boost Bottle High Performance Intake 32mm
(Pre-Tapped) Boost Bottle Performance Intake 32mm (Manic Mechanic) mmbikeparts.com


 
Alternative Views:


Our Price: $24.95
Deal of the Day Price: $9.99


Availability:: Usually Ships in 24 Hours
Manic Mechanic : IN-BOOST-32
:

Description
 

For engines with (32mm stud spacing) intake manifolds *Official Manic Mechanic Part*
Includes o-ring and mounting screws
*Gasket and boost bottle kit sold separately
(19mm O.D. where carb. clamps onto the intake manifold)

  • Less restrictive flow path from the carburetor to the engine.

  • Improved performance.

  • O-Ring seal eliminates vacuum leaks that cause poor idle quality.

  • CNC machined to closely match the intake port on most engines.
    Eliminates engines running too lean & unstable.
    **Note : When using this intake with a performance carburetor it needs to be level to get the expected performance**

For more info: (Intake installation instructions) in main navigation menu

The original gasket partly blocks the intake port. DO NOT USE ORIGINAL GASKET!
Gasket material (Available at auto parts stores), do not use cork!...Pliers to remove factory intake mounting studs.
Remove stock intake using a 10 mm open end wrench. Remove the mounting studs.
Make a new gasket by tracing around the original or for $4.25 Purchase properly formed new gasket under (Miscellaneous Parts)



Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  1 of 1 people found the following review helpful:
 
5 of 5 Very satisfied June 22, 2015
Reviewer: John Corcoran from Saint Petersburg, FL United States  
Definitely increased some speed, 2-3 mph.

Was this review helpful to you?


Browse for more products in the same category as this item:

High Performance Intakes > Boost Bottle Intake (Pre-Tapped) 32mm